NVIDIA sürücüleriyle Ekran Titriyor

Question

Yakın zamanda kendi Arch linux kurulumumu kurdum. Çift monitör kurulumumdaki monitörlerden biriyle bazı sorunlar yaşıyorum. Arada bir, görünüşte rastgele bir şekilde, monitörüm yenilenmeden önce bir saniyeliğine kararacak. Bu oldukça sinir bozucu. Yalnızca monitörlerimden birinde oluyor, diğer monitör tamamen etkilenmiyor. Her türlü şeyi denedim ve birçok forum gönderisini okudum, ancak bu sorunu çözemiyorum.

GTX 1080 TI ile nvidia-450 sürücüsünü çalıştırıyorum. Sorunlu monitör displayport üzerinden bağlanmıştır ve bir 2k monitördür. Diğer monitör de displayport üzerinden bağlanır ve 1080p bir monitördür.

Aşağıda, ilgili bölümler için düzenlenmiş yardımcı olabilecek bazı komut çıktıları verilmiştir:

lspci - k

08:00.0 VGA compatible controller: NVIDIA Corporation GP102 [GeForce GTX 1080 Ti] (rev a1)
    Subsystem: Gigabyte Technology Co., Ltd Device 374c
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia_drm, nvidia

dmesg

[    5.896505] nvidia-modeset: Loading NVIDIA Kernel Mode Setting Driver for UNIX platforms  450.66  Wed Aug 12 19:37:58 UTC 2020
[    5.947554] [drm] [nvidia-drm] [GPU ID 0x00000800] Loading driver
[    5.947559] [drm] Initialized nvidia-drm 0.0.0 20160202 for 0000:08:00.0 on minor 0
[    6.031959] audit: type=1130 audit(1598214227.195:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=nvidia-persistenced comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    6.034669] usb 1-5: set resolution quirk: cval->res = 384
[    6.034934] uvcvideo: Found UVC 1.00 device <unnamed> (046d:0825)
[    6.119775] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[    6.119779] uvcvideo 1-5:1.0: Entity type for entity Extension 6 was not initialized!
[    6.119781] uvcvideo 1-5:1.0: Entity type for entity Extension 7 was not initialized!
[    6.119783] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[    6.119785] uvcvideo 1-5:1.0: Entity type for entity Extension 3 was not initialized!
[    6.119787] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[    6.119882] input: UVC Camera (046d:0825) as /devices/pci0000:00/0000:00:01.3/0000:01:00.0/usb1/1-5/1-5:1.0/input/input32
[    6.119971] usbcore: registered new interface driver uvcvideo
[    6.119972] USB Video Class driver (1.1.1)
[    6.135659] usbcore: registered new interface driver snd-usb-audio
[    7.092020] audit: type=1103 audit(1598214228.255:22): pid=541 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=pam_env,pam_permit acct="lightdm" exe="/usr/bin/lightdm" hostname=? addr=? terminal=:0 res=success'
[    7.114373] audit: type=1130 audit(1598214228.278:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@976 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.124372] audit: type=1101 audit(1598214228.288:24): pid=545 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:accounting grantors=pam_access,pam_unix,pam_permit,pam_time acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[    7.124392] audit: type=1103 audit(1598214228.288:25): pid=545 uid=0 auid=4294967295 ses=4294967295 msg='op=PAM:setcred grantors=? acct="lightdm" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=failed'
[    7.124425] audit: type=1006 audit(1598214228.288:26): pid=545 uid=0 old-auid=4294967295 auid=976 tty=(none) old-ses=4294967295 ses=1 res=1
[    7.743903] igb 0000:06:00.0 enp6s0: igb: enp6s0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
[    7.956953] IPv6: ADDRCONF(NETDEV_CHANGE): enp6s0: link becomes ready
[    9.320055] usb 5-4: device descriptor read/64, error -110
[   24.893783] usb 5-4: device descriptor read/64, error -110
[   25.123356] usb 5-4: new high-speed USB device number 4 using xhci_hcd
[   30.440070] usb 5-4: device descriptor read/64, error -110
[   46.013782] usb 5-4: device descriptor read/64, error -110
[   46.120071] usb usb5-port4: attempt power cycle
[   46.763345] usb 5-4: new high-speed USB device number 5 using xhci_hcd
[   51.863777] xhci_hcd 0000:09:00.3: Timeout while waiting for setup device command
[   57.197078] xhci_hcd 0000:09:00.3: Timeout while waiting for setup device command
[   57.403701] usb 5-4: device not accepting address 5, error -62
[   57.526684] usb 5-4: new high-speed USB device number 6 using xhci_hcd
[   62.530134] xhci_hcd 0000:09:00.3: Timeout while waiting for setup device command
[   67.863370] xhci_hcd 0000:09:00.3: Timeout while waiting for setup device command
[   68.070345] usb 5-4: device not accepting address 6, error -62
[   68.070416] usb usb5-port4: unable to enumerate USB device
[   71.757209] kauditd_printk_skb: 5 callbacks suppressed

Daha fazla bilgiye ihtiyacınız olursa bana bildirin. Bu sorun beni deli ediyor.

Answer 1

Görünüşe göre, ekran titremesi sorunumun sebebi bestecim: picom. Bu sorunu picom yapılandırma dosyamda arka ucumu glx'ten xrender'a değiştirerek çözdüm.