Nilai awal tidak ada

Question

Ini adalah pertanyaan lanjutan . Setelah saya memecahkan kesalahan singularitas struktural. Itu membuat saya mengatakan kesalahan baru

Hochdruckreiniger2 : Iteration variable "der(Hochdrucktank.V)" is missing start value!
Iteration variable "der(Hochdrucktank.medium.h)" is missing start value
Iteration variable "der(Niederdrucktank.V)" is missing start value!
Iteration variable "der(Niederdrucktank.medium.h)" is missing start value!
Iteration variable "der(Swept1.medium.p)" is missing start value! 

Meskipun saya memberikan nilai awal dalam inisialisasi dan menginisialisasi subbagian, saya mendapatkan kesalahan ini. Bisakah Anda memberi saya saran untuk memecahkan masalah ini?

model Hochdruckreiniger2
    //Declaration(s)
    Real V_max = 0.000003;
    Real V_tod = 0.000002;
    Real pi = 3.14;
    Real N = 2800;
    Real T_per;
    Real f;
    Real opening_NP;
    Real opening_HP;
    //Component(s)
    Modelica.Fluid.Machines.SweptVolume Swept1 (
        pistonCrossArea = 0.0001131,
        clearance = 0.000002,
        portsData = {Modelica.Fluid.Vessels.BaseClasses.VesselPortsData(diameter=
        0.1),Modelica.Fluid.Vessels.BaseClasses.VesselPortsData(diameter=
        0.1)},
        redeclare package Medium = Modelica.Media.Water.StandardWater,
        nPorts = 2,
        use_portsData = true,
        p_start = 100,
        use_T_start = true,
        T_start = 293.15,
        V(start = 10),
        U(start = 20),
        m(start = 10));
    inner Modelica.Fluid.System system;
    Modelica.Fluid.Vessels.OpenTank Niederdrucktank (
        redeclare package Medium = Modelica.Media.Water.StandardWater,
        nPorts = 1,
        height = 40.84,
        crossArea = 10,
        portsData = {Modelica.Fluid.Vessels.BaseClasses.VesselPortsData(diameter=
        0.1)},
        V(start = 10));
    Modelica.Fluid.Vessels.OpenTank Hochdrucktank (
        redeclare package Medium = Modelica.Media.Water.StandardWater,
        nPorts = 1,
        height = 4997,
        crossArea = 10,
        portsData = {Modelica.Fluid.Vessels.BaseClasses.VesselPortsData(diameter=
        0.1)},
        V(start = 100));
    Modelica.Mechanics.Translational.Sources.Position Posit1 (exact = true);
    Modelica.Blocks.Sources.Sine Sine1 (freqHz = 46.72, amplitude = 0.0000005);
    Modelica.Fluid.Valves.ValveIncompressible Hochdruckventile (
        dp_nominal = 66.6175,
        m_flow_nominal = 0.04873,
        rho_nominal = 1019.921,
        opening = opening_HP,
        redeclare package Medium = Modelica.Media.Water.StandardWater);
    Modelica.Fluid.Valves.ValveIncompressible Niederdruckventile (
        dp_nominal = 65.21,
        m_flow_nominal = 0.04873,
        rho_nominal = 998.388,
        opening = opening_NP,
        redeclare package Medium = Modelica.Media.Water.StandardWater);


equation
    T_per=pi/(180*3600*N/60);//Radian  
        f=((V_max-V_tod)/2)*sin((2*pi*time*T_per)+(V_tod+(V_max-V_tod)/2));
          if der(f)>=0 then
            opening_NP=1;
            opening_HP=0;
           else
            opening_NP=0;
            opening_HP=1;
          end if;
    //Connection(s)
    connect(Sine1.y, Posit1.s_ref);
    connect(Posit1.flange, Swept1.flange);
    connect(Hochdrucktank.ports[1], Hochdruckventile.port_a);
    connect(Hochdruckventile.port_b, Swept1.ports[2]);
    connect(Niederdrucktank.ports[1], Niederdruckventile.port_a);
    connect(Niederdruckventile.port_b, Swept1.ports[1]);
end  Hochdruckreiniger2;

Answer 1

Untuk memperkenalkan nilai tebakan untuk turunan, Anda harus melakukan sesuatu seperti berikut di Modelica:

  Real dummyStart(start=...);
equation
  dummyStart=der(Hochdrucktank.V);

atau mungkin:

  Real dummyStart(start=...)=der(Hochdrucktank.V);

Dalam beberapa kasus, variabel tambahan tidak diperlukan karena variabel tersebut sudah ada, dan itu hanya masalah menemukannya.