Dupliquer l'étape [step2] détectée lors de l'exécution du job = [job]. Si l'une des étapes échoue, les deux seront exécutées à nouveau au redémarrage
Le décideur Spring Batch entre dans forloop. J'ai ci-dessous les exigences.
Si Step1
exécuter, vérifier decider () si "NO"
puis terminer Job, si "Yes"
ensuite exécuter Step2
, si Step2 est TERMINE puis exécuter decider () f "NO"
puis terminer Job, si "Yes"
ensuite exécuter Step3
.
Des conseils comment pouvons-nous configurer dans le lot?
2020-12-08 11:41:11.473 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Executing step: [step1]
step1
2020-12-08 11:41:11.493 INFO 16800 --- [ main] o.s.batch.core.step.AbstractStep : Step: [step1] executed in 20ms
2020-12-08 11:41:11.508 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Executing step: [step2]
step2
2020-12-08 11:41:11.513 INFO 16800 --- [ main] o.s.batch.core.step.AbstractStep : Step: [step2] executed in 5ms
2020-12-08 11:41:11.568 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Duplicate step [step2] detected in execution of job=[job]. If either step fails, both will be executed again on restart.
2020-12-08 11:41:11.571 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Executing step: [step2]
step2
2020-12-08 11:41:11.577 INFO 16800 --- [ main] o.s.batch.core.step.AbstractStep : Step: [step2] executed in 6ms
2020-12-08 11:41:11.585 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Duplicate step [step2] detected in execution of job=[job]. If either step fails, both will be executed again on restart.
2020-12-08 11:41:11.589 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Executing step: [step2]
step2
2020-12-08 11:41:11.594 INFO 16800 --- [ main] o.s.batch.core.step.AbstractStep : Step: [step2] executed in 5ms
2020-12-08 11:41:11.601 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Duplicate step [step2] detected in execution of job=[job]. If either step fails, both will be executed again on restart.
2020-12-08 11:41:11.604 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Executing step: [step2]
step2
2020-12-08 11:41:11.608 INFO 16800 --- [ main] o.s.batch.core.step.AbstractStep : Step: [step2] executed in 3ms
2020-12-08 11:41:11.616 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Duplicate step [step2] detected in execution of job=[job]. If either step fails, both will be executed again on restart.
2020-12-08 11:41:11.618 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Executing step: [step2]
step2
2020-12-08 11:41:11.623 INFO 16800 --- [ main] o.s.batch.core.step.AbstractStep : Step: [step2] executed in 5ms
2020-12-08 11:41:11.630 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Duplicate step [step2] detected in execution of job=[job]. If either step fails, both will be executed again on restart.
2020-12-08 11:41:11.634 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Executing step: [step2]
step2
2020-12-08 11:41:11.638 INFO 16800 --- [ main] o.s.batch.core.step.AbstractStep : Step: [step2] executed in 4ms
2020-12-08 11:41:11.646 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Duplicate step [step2] detected in execution of job=[job]. If either step fails, both will be executed again on restart.
2020-12-08 11:41:11.648 INFO 16800 --- [ main] o.s.batch.core.job.SimpleStepHandler : Executing step: [step2]
step2
Code Java
@Configuration
public class Config {
@Autowired
private JobBuilderFactory jobs;
@Autowired
private StepBuilderFactory steps;
@Bean
public Step step1() {
return steps.get("step1")
.tasklet((contribution, chunkContext) -> {
System.out.println("step1");
return RepeatStatus.FINISHED;
})
.build();
}
@Bean
public JobExecutionDecider decider() {
return (jobExecution, stepExecution) -> new FlowExecutionStatus("SUCCESS"); // or NO
}
@Bean
public Step step2() {
return steps.get("step2")
.tasklet((contribution, chunkContext) -> {
System.out.println("step2");
return RepeatStatus.FINISHED;
})
.build();
}
@Bean
public Step step3() {
return steps.get("step3")
.tasklet((contribution, chunkContext) -> {
System.out.println("step3");
return RepeatStatus.FINISHED;
})
.build();
}
@Bean
public Step step5() {
return steps.get("step5")
.tasklet((contribution, chunkContext) -> {
System.out.println("Step 5");
return RepeatStatus.FINISHED;
})
.build();
}
@Bean
public Step step4() {
return steps.get("step4")
.tasklet((contribution, chunkContext) -> {
System.out.println("Step 4");
return RepeatStatus.FINISHED;
})
.build();
}
@Bean
public Job job() {
return jobs.get("job")
.incrementer(new RunIdIncrementer())
.start(step1())
.next(decider())
.from(decider()).on("SUCCESS").to(step2())
.from(decider()).on("NO").end()
.from(step2()).on("COMPLETED").to(decider())
.from(decider()).on("SUCCESS").to(step3())
.from(decider()).on("NO").end()
.end()
.build();
}
}
Remarque - En raison de restrictions de sécurité, je ne peux pas charger le diagramme de flux à partir du poste de travail de bureau :(
Réponses
Vous avez un bogue dans votre définition de flux. Le SUCCESS
résultat du décideur passe en deux étapes différentes:
.from(decider()).on("SUCCESS").to(step2())
...
.from(decider()).on("SUCCESS").to(step3())
De plus, les définitions de transition de step2
sont incomplètes. Vous avez uniquement défini la transition à partir de l'étape 2 COMPLETED
:
.from(step2()).on("COMPLETED").to(decider())
vous devez également définir la transition à partir step2
des autres cas.