Javaは「参照渡し」または「値渡し」ですか？

Question

私はいつもJavaが参照渡しを使うと思っていました。

ただし、そうではないと主張するブログ投稿（たとえば、このブログ）をいくつか見ました（ブログ投稿では、Javaは値渡しを使用すると書かれています）。

私は彼らが作っている区別を理解していないと思います。

説明は何ですか？

Answer 1

Javaは常に値渡しです。
残念ながら、オブジェクトを処理することはまったくありません。代わりに、参照 と呼ばれるオブジェクトハンドル_{^{（もちろん値によって渡されます）を}}ジャグリングします。選択した用語とセマンティクスは、多くの初心者を簡単に混乱させます。

こんなふうになります：

public static void main(String[] args) {
    Dog aDog = new Dog("Max");
    Dog oldDog = aDog;

    // we pass the object to foo
    foo(aDog);
    // aDog variable is still pointing to the "Max" dog when foo(...) returns
    aDog.getName().equals("Max"); // true
    aDog.getName().equals("Fifi"); // false
    aDog == oldDog; // true
}

public static void foo(Dog d) {
    d.getName().equals("Max"); // true
    // change d inside of foo() to point to a new Dog instance "Fifi"
    d = new Dog("Fifi");
    d.getName().equals("Fifi"); // true
}

上記の例でaDog.getName()は、引き続き"Max"。を返します。値aDog内のmain機能で変更されていないfooとDog "Fifi"オブジェクト参照を値渡しされます。参照によって渡された場合、aDog.getName()inmainはへ"Fifi"の呼び出し後に戻りfooます。

同様に：

public static void main(String[] args) {
    Dog aDog = new Dog("Max");
    Dog oldDog = aDog;

    foo(aDog);
    // when foo(...) returns, the name of the dog has been changed to "Fifi"
    aDog.getName().equals("Fifi"); // true
    // but it is still the same dog:
    aDog == oldDog; // true
}

public static void foo(Dog d) {
    d.getName().equals("Max"); // true
    // this changes the name of d to be "Fifi"
    d.setName("Fifi");
}

上記の例でFifiはfoo(aDog)、オブジェクトの名前がの中に設定されているため、は呼び出し後の犬の名前ですfoo(...)。でfoo実行さdれる操作は、すべての実用的な目的で、で実行されるようなものですが、変数自体の値を変更するaDogことはできませんaDog。

Answer 2

あなたが私の記事を参照していることに気づきました。

Java仕様では、Javaのすべてが値渡しであるとされています。Javaには「参照渡し」のようなものはありません。

これを理解するための鍵は、

Dog myDog;

犬ではありません。それは実際には犬へのポインタです。

それが意味するのは、あなたが持っているときです

Dog myDog = new Dog("Rover");
foo(myDog);

基本的に、作成されたオブジェクトのアドレスをメソッドに渡します。Dogfoo

（基本的に、Javaポインターは直接アドレスではないためですが、そのように考えるのが最も簡単です）

Dogオブジェクトがメモリアドレス42にあるとします。これは、42をメソッドに渡すことを意味します。

メソッドが次のように定義されている場合

public void foo(Dog someDog) {
    someDog.setName("Max");     // AAA
    someDog = new Dog("Fifi");  // BBB
    someDog.setName("Rowlf");   // CCC
}

何が起こっているのか見てみましょう。

• パラメータsomeDogは値42に設定されます
• 行「AAA」で
  • someDogDog（Dogアドレス42のオブジェクト）が指すものが続きます
  • それDog（住所42にあるもの）は彼の名前をマックスに変更するように求められます
• 行「BBB」で
  • 新しいDogが作成されます。彼が住所74にいるとしましょう
  • パラメータsomeDogを74に割り当てます
• 行「CCC」で
  • someDogは、Dogそれが指すものに続きDogます（アドレス74のオブジェクト）
  • それDog（住所74にあるもの）は彼の名前をロルフに変更するように求められます
• その後、戻ります

次に、メソッドの外部で何が起こるかを考えてみましょう。

Did myDog change?

There's the key.

Keeping in mind that myDog is a pointer, and not an actual Dog, the answer is NO. myDog still has the value 42; it's still pointing to the original Dog (but note that because of line "AAA", its name is now "Max" - still the same Dog; myDog's value has not changed.)

It's perfectly valid to follow an address and change what's at the end of it; that does not change the variable, however.

Java works exactly like C. You can assign a pointer, pass the pointer to a method, follow the pointer in the method and change the data that was pointed to. However, you cannot change where that pointer points.

In C++, Ada, Pascal and other languages that support pass-by-reference, you can actually change the variable that was passed.

If Java had pass-by-reference semantics, the foo method we defined above would have changed where myDog was pointing when it assigned someDog on line BBB.

Think of reference parameters as being aliases for the variable passed in. When that alias is assigned, so is the variable that was passed in.

Answer 3

Java always passes arguments by value, NOT by reference.

---

Let me explain this through an example:

public class Main {

     public static void main(String[] args) {
          Foo f = new Foo("f");
          changeReference(f); // It won't change the reference!
          modifyReference(f); // It will modify the object that the reference variable "f" refers to!
     }

     public static void changeReference(Foo a) {
          Foo b = new Foo("b");
          a = b;
     }

     public static void modifyReference(Foo c) {
          c.setAttribute("c");
     }

}

I will explain this in steps:

1. Declaring a reference named f of type Foo and assign it a new object of type Foo with an attribute "f".

    Foo f = new Foo("f");
   

   

2. From the method side, a reference of type Foo with a name a is declared and it's initially assigned null.

    public static void changeReference(Foo a)
   

   

3. As you call the method changeReference, the reference a will be assigned the object which is passed as an argument.

    changeReference(f);
   

   

4. Declaring a reference named b of type Foo and assign it a new object of type Foo with an attribute "b".

    Foo b = new Foo("b");
   

   

5. a = b makes a new assignment to the reference a, not f, of the object whose attribute is "b".

   

6. As you call modifyReference(Foo c) method, a reference c is created and assigned the object with attribute "f".

   

7. c.setAttribute("c"); will change the attribute of the object that reference c points to it, and it's the same object that reference f points to it.

   

I hope you understand now how passing objects as arguments works in Java :)

Answer 4

This will give you some insights of how Java really works to the point that in your next discussion about Java passing by reference or passing by value you'll just smile :-)

Step one please erase from your mind that word that starts with 'p' "_ _ _ _ _ _ _", especially if you come from other programming languages. Java and 'p' cannot be written in the same book, forum, or even txt.

Step two remember that when you pass an Object into a method you're passing the Object reference and not the Object itself.

• Student: Master, does this mean that Java is pass-by-reference?
• Master: Grasshopper, No.

Now think of what an Object's reference/variable does/is:

1. A variable holds the bits that tell the JVM how to get to the referenced Object in memory (Heap).
2. When passing arguments to a method you ARE NOT passing the reference variable, but a copy of the bits in the reference variable. Something like this: 3bad086a. 3bad086a represents a way to get to the passed object.
3. So you're just passing 3bad086a that it's the value of the reference.
4. You're passing the value of the reference and not the reference itself (and not the object).
5. This value is actually COPIED and given to the method.

In the following (please don't try to compile/execute this...):

1. Person person;
2. person = new Person("Tom");
3. changeName(person);
4.
5. //I didn't use Person person below as an argument to be nice
6. static void changeName(Person anotherReferenceToTheSamePersonObject) {
7.     anotherReferenceToTheSamePersonObject.setName("Jerry");
8. }

What happens?

• The variable person is created in line #1 and it's null at the beginning.
• A new Person Object is created in line #2, stored in memory, and the variable person is given the reference to the Person object. That is, its address. Let's say 3bad086a.
• The variable person holding the address of the Object is passed to the function in line #3.
• In line #4 you can listen to the sound of silence
• Check the comment on line #5
• A method local variable -anotherReferenceToTheSamePersonObject- is created and then comes the magic in line #6:
  • The variable/reference person is copied bit-by-bit and passed to anotherReferenceToTheSamePersonObject inside the function.
  • No new instances of Person are created.
  • Both "person" and "anotherReferenceToTheSamePersonObject" hold the same value of 3bad086a.
  • Don't try this but person==anotherReferenceToTheSamePersonObject would be true.
  • Both variables have IDENTICAL COPIES of the reference and they both refer to the same Person Object, the SAME Object on the Heap and NOT A COPY.

A picture is worth a thousand words:

Note that the anotherReferenceToTheSamePersonObject arrows is directed towards the Object and not towards the variable person!

If you didn't get it then just trust me and remember that it's better to say that Java is pass by value. Well, pass by reference value. Oh well, even better is pass-by-copy-of-the-variable-value! ;)

Now feel free to hate me but note that given this there is no difference between passing primitive data types and Objects when talking about method arguments.

You always pass a copy of the bits of the value of the reference!

• If it's a primitive data type these bits will contain the value of the primitive data type itself.
• If it's an Object the bits will contain the value of the address that tells the JVM how to get to the Object.

Java is pass-by-value because inside a method you can modify the referenced Object as much as you want but no matter how hard you try you'll never be able to modify the passed variable that will keep referencing (not p _ _ _ _ _ _ _) the same Object no matter what!

---

The changeName function above will never be able to modify the actual content (the bit values) of the passed reference. In other word changeName cannot make Person person refer to another Object.

---

Of course you can cut it short and just say that Java is pass-by-value!

Answer 5

Java is always pass by value, with no exceptions, ever.

So how is it that anyone can be at all confused by this, and believe that Java is pass by reference, or think they have an example of Java acting as pass by reference? The key point is that Java never provides direct access to the values of objects themselves, in any circumstances. The only access to objects is through a reference to that object. Because Java objects are always accessed through a reference, rather than directly, it is common to talk about fields and variables and method arguments as being objects, when pedantically they are only references to objects. The confusion stems from this (strictly speaking, incorrect) change in nomenclature.

So, when calling a method

• For primitive arguments (int, long, etc.), the pass by value is the actual value of the primitive (for example, 3).
• For objects, the pass by value is the value of the reference to the object.

So if you have doSomething(foo) and public void doSomething(Foo foo) { .. } the two Foos have copied references that point to the same objects.

Naturally, passing by value a reference to an object looks very much like (and is indistinguishable in practice from) passing an object by reference.

Answer 6

Java passes references by value.

So you can't change the reference that gets passed in.

Answer 7

I feel like arguing about "pass-by-reference vs pass-by-value" is not super-helpful.

If you say, "Java is pass-by-whatever (reference/value)", in either case, you're not provide a complete answer. Here's some additional information that will hopefully aid in understanding what's happening in memory.

Crash course on stack/heap before we get to the Java implementation: Values go on and off the stack in a nice orderly fashion, like a stack of plates at a cafeteria. Memory in the heap (also known as dynamic memory) is haphazard and disorganized. The JVM just finds space wherever it can, and frees it up as the variables that use it are no longer needed.

Okay. First off, local primitives go on the stack. So this code:

int x = 3;
float y = 101.1f;
boolean amIAwesome = true;

results in this:

When you declare and instantiate an object. The actual object goes on the heap. What goes on the stack? The address of the object on the heap. C++ programmers would call this a pointer, but some Java developers are against the word "pointer". Whatever. Just know that the address of the object goes on the stack.

Like so:

int problems = 99;
String name = "Jay-Z";

An array is an object, so it goes on the heap as well. And what about the objects in the array? They get their own heap space, and the address of each object goes inside the array.

JButton[] marxBros = new JButton[3];
marxBros[0] = new JButton("Groucho");
marxBros[1] = new JButton("Zeppo");
marxBros[2] = new JButton("Harpo");

So, what gets passed in when you call a method? If you pass in an object, what you're actually passing in is the address of the object. Some might say the "value" of the address, and some say it's just a reference to the object. This is the genesis of the holy war between "reference" and "value" proponents. What you call it isn't as important as that you understand that what's getting passed in is the address to the object.

private static void shout(String name){
    System.out.println("There goes " + name + "!");
}

public static void main(String[] args){
    String hisName = "John J. Jingleheimerschmitz";
    String myName = hisName;
    shout(myName);
}

One String gets created and space for it is allocated in the heap, and the address to the string is stored on the stack and given the identifier hisName, since the address of the second String is the same as the first, no new String is created and no new heap space is allocated, but a new identifier is created on the stack. Then we call shout(): a new stack frame is created and a new identifier, name is created and assigned the address of the already-existing String.

So, value, reference? You say "potato".

Answer 8

Just to show the contrast, compare the following C++ and Java snippets:

In C++: Note: Bad code - memory leaks! But it demonstrates the point.

void cppMethod(int val, int &ref, Dog obj, Dog &objRef, Dog *objPtr, Dog *&objPtrRef)
{
    val = 7; // Modifies the copy
    ref = 7; // Modifies the original variable
    obj.SetName("obj"); // Modifies the copy of Dog passed
    objRef.SetName("objRef"); // Modifies the original Dog passed
    objPtr->SetName("objPtr"); // Modifies the original Dog pointed to 
                               // by the copy of the pointer passed.
    objPtr = new Dog("newObjPtr");  // Modifies the copy of the pointer, 
                                   // leaving the original object alone.
    objPtrRef->SetName("objRefPtr"); // Modifies the original Dog pointed to 
                                    // by the original pointer passed. 
    objPtrRef = new Dog("newObjPtrRef"); // Modifies the original pointer passed
}

int main()
{
    int a = 0;
    int b = 0;
    Dog d0 = Dog("d0");
    Dog d1 = Dog("d1");
    Dog *d2 = new Dog("d2");
    Dog *d3 = new Dog("d3");
    cppMethod(a, b, d0, d1, d2, d3);
    // a is still set to 0
    // b is now set to 7
    // d0 still have name "d0"
    // d1 now has name "objRef"
    // d2 now has name "objPtr"
    // d3 now has name "newObjPtrRef"
}

In Java,

public static void javaMethod(int val, Dog objPtr)
{
   val = 7; // Modifies the copy
   objPtr.SetName("objPtr") // Modifies the original Dog pointed to 
                            // by the copy of the pointer passed.
   objPtr = new Dog("newObjPtr");  // Modifies the copy of the pointer, 
                                  // leaving the original object alone.
}

public static void main()
{
    int a = 0;
    Dog d0 = new Dog("d0");
    javaMethod(a, d0);
    // a is still set to 0
    // d0 now has name "objPtr"
}

Java only has the two types of passing: by value for built-in types, and by value of the pointer for object types.

Answer 9

Java passes references to objects by value.

Answer 10

Basically, reassigning Object parameters doesn't affect the argument, e.g.,

private void foo(Object bar) {
    bar = null;
}

public static void main(String[] args) {
    String baz = "Hah!";
    foo(baz);
    System.out.println(baz);
}

will print out "Hah!" instead of null. The reason this works is because bar is a copy of the value of baz, which is just a reference to "Hah!". If it were the actual reference itself, then foo would have redefined baz to null.

Answer 11

I can't believe that nobody mentioned Barbara Liskov yet. When she designed CLU in 1974, she ran into this same terminology problem, and she invented the term call by sharing (also known as call by object-sharing and call by object) for this specific case of "call by value where the value is a reference".

Answer 12

The crux of the matter is that the word reference in the expression "pass by reference" means something completely different from the usual meaning of the word reference in Java.

Usually in Java reference means a a reference to an object. But the technical terms pass by reference/value from programming language theory is talking about a reference to the memory cell holding the variable, which is something completely different.

Answer 13

In java everything is reference, so when you have something like: Point pnt1 = new Point(0,0); Java does following:

1. Creates new Point object
2. Creates new Point reference and initialize that reference to point (refer to) on previously created Point object.
3. From here, through Point object life, you will access to that object through pnt1 reference. So we can say that in Java you manipulate object through its reference.
   

Java doesn't pass method arguments by reference; it passes them by value. I will use example from this site:

public static void tricky(Point arg1, Point arg2) {
  arg1.x = 100;
  arg1.y = 100;
  Point temp = arg1;
  arg1 = arg2;
  arg2 = temp;
}
public static void main(String [] args) {
  Point pnt1 = new Point(0,0);
  Point pnt2 = new Point(0,0);
  System.out.println("X1: " + pnt1.x + " Y1: " +pnt1.y); 
  System.out.println("X2: " + pnt2.x + " Y2: " +pnt2.y);
  System.out.println(" ");
  tricky(pnt1,pnt2);
  System.out.println("X1: " + pnt1.x + " Y1:" + pnt1.y); 
  System.out.println("X2: " + pnt2.x + " Y2: " +pnt2.y);  
}

Flow of the program:

Point pnt1 = new Point(0,0);
Point pnt2 = new Point(0,0);

Creating two different Point object with two different reference associated.

System.out.println("X1: " + pnt1.x + " Y1: " +pnt1.y); 
System.out.println("X2: " + pnt2.x + " Y2: " +pnt2.y);
System.out.println(" ");

As expected output will be:

X1: 0     Y1: 0
X2: 0     Y2: 0

On this line 'pass-by-value' goes into the play...

tricky(pnt1,pnt2);           public void tricky(Point arg1, Point arg2);

References pnt1 and pnt2 are passed by value to the tricky method, which means that now yours references pnt1 and pnt2 have their copies named arg1 and arg2.So pnt1 and arg1 points to the same object. (Same for the pnt2 and arg2)

In the tricky method:

 arg1.x = 100;
 arg1.y = 100;

Next in the tricky method

Point temp = arg1;
arg1 = arg2;
arg2 = temp;

Here, you first create new temp Point reference which will point on same place like arg1 reference. Then you move reference arg1 to point to the same place like arg2 reference. Finally arg2 will point to the same place like temp.

From here scope of tricky method is gone and you don't have access any more to the references: arg1, arg2, temp. But important note is that everything you do with these references when they are 'in life' will permanently affect object on which they are point to.

So after executing method tricky, when you return to main, you have this situation:

So now, completely execution of program will be:

X1: 0         Y1: 0
X2: 0         Y2: 0
X1: 100       Y1: 100
X2: 0         Y2: 0

Answer 14

Java is always pass by value, not pass by reference

First of all, we need to understand what pass by value and pass by reference are.

Pass by value means that you are making a copy in memory of the actual parameter's value that is passed in. This is a copy of the contents of the actual parameter.

Pass by reference (also called pass by address) means that a copy of the address of the actual parameter is stored.

Sometimes Java can give the illusion of pass by reference. Let's see how it works by using the example below:

public class PassByValue {
    public static void main(String[] args) {
        Test t = new Test();
        t.name = "initialvalue";
        new PassByValue().changeValue(t);
        System.out.println(t.name);
    }
    
    public void changeValue(Test f) {
        f.name = "changevalue";
    }
}

class Test {
    String name;
}

The output of this program is:

changevalue

Let's understand step by step:

Test t = new Test();

As we all know it will create an object in the heap and return the reference value back to t. For example, suppose the value of t is 0x100234 (we don't know the actual JVM internal value, this is just an example) .

new PassByValue().changeValue(t);

When passing reference t to the function it will not directly pass the actual reference value of object test, but it will create a copy of t and then pass it to the function. Since it is passing by value, it passes a copy of the variable rather than the actual reference of it. Since we said the value of t was 0x100234, both t and f will have the same value and hence they will point to the same object.

If you change anything in the function using reference f it will modify the existing contents of the object. That is why we got the output changevalue, which is updated in the function.

To understand this more clearly, consider the following example:

public class PassByValue {
    public static void main(String[] args) {
        Test t = new Test();
        t.name = "initialvalue";
        new PassByValue().changeRefence(t);
        System.out.println(t.name);
    }
    
    public void changeRefence(Test f) {
        f = null;
    }
}

class Test {
    String name;
}

Will this throw a NullPointerException? No, because it only passes a copy of the reference. In the case of passing by reference, it could have thrown a NullPointerException, as seen below:

Hopefully this will help.

Answer 15

There are already great answers that cover this. I wanted to make a small contribution by sharing a very simple example (which will compile) contrasting the behaviors between Pass-by-reference in c++ and Pass-by-value in Java.

A few points:

1. The term "reference" is a overloaded with two separate meanings. In Java it simply means a pointer, but in the context of "Pass-by-reference" it means a handle to the original variable which was passed in.
2. Java is Pass-by-value. Java is a descendent of C (among other languages). Before C, several (but not all) earlier languages like FORTRAN and COBOL supported PBR, but C did not. PBR allowed these other languages to make changes to the passed variables inside sub-routines. In order to accomplish the same thing (i.e. change the values of variables inside functions), C programmers passed pointers to variables into functions. Languages inspired by C, such as Java, borrowed this idea and continue to pass pointer to methods as C did, except that Java calls its pointers References. Again, this is a different use of the word "Reference" than in "Pass-By-Reference".
3. C++ allows Pass-by-reference by declaring a reference parameter using the "&" character (which happens to be the same character used to indicate "the address of a variable" in both C and C++). For example, if we pass in a pointer by reference, the parameter and the argument are not just pointing to the same object. Rather, they are the same variable. If one gets set to a different address or to null, so does the other.
4. In the C++ example below I'm passing a pointer to a null terminated string by reference. And in the Java example below I'm passing a Java reference to a String (again, the same as a pointer to a String) by value. Notice the output in the comments.

C++ pass by reference example:

using namespace std;
#include <iostream>

void change (char *&str){   // the '&' makes this a reference parameter
    str = NULL;
}

int main()
{
    char *str = "not Null";
    change(str);
    cout<<"str is " << str;      // ==>str is <null>
}

Java pass "a Java reference" by value example

public class ValueDemo{

    public void change (String str){
        str = null;
    }

     public static void main(String []args){
        ValueDemo vd = new ValueDemo();
        String str = "not null";
        vd.change(str);
        System.out.println("str is " + str);    // ==> str is not null!!
                                                // Note that if "str" was
                                                // passed-by-reference, it
                                                // WOULD BE NULL after the
                                                // call to change().
     }
}

EDIT

Several people have written comments which seem to indicate that either they are not looking at my examples or they don't get the c++ example. Not sure where the disconnect is, but guessing the c++ example is not clear. I'm posting the same example in pascal because I think pass-by-reference looks cleaner in pascal, but I could be wrong. I might just be confusing people more; I hope not.

In pascal, parameters passed-by-reference are called "var parameters". In the procedure setToNil below, please note the keyword 'var' which precedes the parameter 'ptr'. When a pointer is passed to this procedure, it will be passed by reference. Note the behavior: when this procedure sets ptr to nil (that's pascal speak for NULL), it will set the argument to nil--you can't do that in Java.

program passByRefDemo;
type 
   iptr = ^integer;
var
   ptr: iptr;

   procedure setToNil(var ptr : iptr);
   begin
       ptr := nil;
   end;

begin
   new(ptr);
   ptr^ := 10;
   setToNil(ptr);
   if (ptr = nil) then
       writeln('ptr seems to be nil');     { ptr should be nil, so this line will run. }
end.

EDIT 2

Some excerpts from "THE Java Programming Language" by Ken Arnold, James Gosling (the guy who invented Java), and David Holmes, chapter 2, section 2.6.5

All parameters to methods are passed "by value". In other words, values of parameter variables in a method are copies of the invoker specified as arguments.

He goes on to make the same point regarding objects . . .

You should note that when the parameter is an object reference, it is the object reference-not the object itself-that is passed "by value".

And towards the end of the same section he makes a broader statement about java being only pass by value and never pass by reference.

The Java programming language does not pass objects by reference; it passes object references by value. Because two copies of the same reference refer to the same actual object, changes made through one reference variable are visible through the other. There is exactly one parameter passing mode-pass by value-and that helps keep things simple.

This section of the book has a great explanation of parameter passing in Java and of the distinction between pass-by-reference and pass-by-value and it's by the creator of Java. I would encourage anyone to read it, especially if you're still not convinced.

I think the difference between the two models is very subtle and unless you've done programming where you actually used pass-by-reference, it's easy to miss where two models differ.

I hope this settles the debate, but probably won't.

EDIT 3

I might be a little obsessed with this post. Probably because I feel that the makers of Java inadvertently spread misinformation. If instead of using the word "reference" for pointers they had used something else, say dingleberry, there would've been no problem. You could say, "Java passes dingleberries by value and not by reference", and nobody would be confused.

That's the reason only Java developers have issue with this. They look at the word "reference" and think they know exactly what that means, so they don't even bother to consider the opposing argument.

Anyway, I noticed a comment in an older post, which made a balloon analogy which I really liked. So much so that I decided to glue together some clip-art to make a set of cartoons to illustrate the point.

Passing a reference by value--Changes to the reference are not reflected in the caller's scope, but the changes to the object are. This is because the reference is copied, but the both the original and the copy refer to the same object.

Pass by reference--There is no copy of the reference. Single reference is shared by both the caller and the function being called. Any changes to the reference or the Object's data are reflected in the caller's scope.

EDIT 4

I have seen posts on this topic which describe the low level implementation of parameter passing in Java, which I think is great and very helpful because it makes an abstract idea concrete. However, to me the question is more about the behavior described in the language specification than about the technical implementation of the behavior. This is an exerpt from the Java Language Specification, section 8.4.1 :

When the method or constructor is invoked (§15.12), the values of the actual argument expressions initialize newly created parameter variables, each of the declared type, before execution of the body of the method or constructor. The Identifier that appears in the DeclaratorId may be used as a simple name in the body of the method or constructor to refer to the formal parameter.

Which means, java creates a copy of the passed parameters before executing a method. Like most people who studied compilers in college, I used "The Dragon Book" which is THE compilers book. It has a good description of "Call-by-value" and "Call-by-Reference" in Chapter 1. The Call-by-value description matches up with Java Specs exactly.

Back when I studied compilers-in the 90's, I used the first edition of the book from 1986 which pre-dated Java by about 9 or 10 years. However, I just ran across a copy of the 2nd Eddition from 2007 which actually mentions Java! Section 1.6.6 labeled "Parameter Passing Mechanisms" describes parameter passing pretty nicely. Here is an excerpt under the heading "Call-by-value" which mentions Java:

In call-by-value, the actual parameter is evaluated (if it is an expression) or copied (if it is a variable). The value is placed in the location belonging to the corresponding formal parameter of the called procedure. This method is used in C and Java, and is a common option in C++ , as well as in most other languages.

Answer 16

Java is a call by value

How it works

• You always pass a copy of the bits of the value of the reference!

• If it's a primitive data type these bits contain the value of the primitive data type itself, That's why if we change the value of header inside the method then it does not reflect the changes outside.

• If it's an object data type like Foo foo=new Foo() then in this case copy of the address of the object passes like file shortcut , suppose we have a text file abc.txt at C:\desktop and suppose we make shortcut of the same file and put this inside C:\desktop\abc-shortcut so when you access the file from C:\desktop\abc.txt and write 'Stack Overflow' and close the file and again you open the file from shortcut then you write ' is the largest online community for programmers to learn' then total file change will be 'Stack Overflow is the largest online community for programmers to learn' which means it doesn't matter from where you open the file , each time we were accessing the same file , here we can assume Foo as a file and suppose foo stored at 123hd7h(original address like C:\desktop\abc.txt ) address and 234jdid(copied address like C:\desktop\abc-shortcut which actually contains the original address of the file inside) .. So for better understanding make shortcut file and feel..

Answer 17

A reference is always a value when represented, no matter what language you use.

Getting an outside of the box view, let's look at Assembly or some low level memory management. At the CPU level a reference to anything immediately becomes a value if it gets written to memory or to one of the CPU registers. (That is why pointer is a good definition. It is a value, which has a purpose at the same time).

Data in memory has a Location and at that location there is a value (byte,word, whatever). In Assembly we have a convenient solution to give a Name to certain Location (aka variable), but when compiling the code, the assembler simply replaces Name with the designated location just like your browser replaces domain names with IP addresses.

Down to the core it is technically impossible to pass a reference to anything in any language without representing it (when it immediately becomes a value).

Lets say we have a variable Foo, its Location is at the 47th byte in memory and its Value is 5. We have another variable Ref2Foo which is at 223rd byte in memory, and its value will be 47. This Ref2Foo might be a technical variable, not explicitly created by the program. If you just look at 5 and 47 without any other information, you will see just two Values. If you use them as references then to reach to 5 we have to travel:

(Name)[Location] -> [Value at the Location]
---------------------
(Ref2Foo)[223]  -> 47
(Foo)[47]       -> 5

This is how jump-tables work.

If we want to call a method/function/procedure with Foo's value, there are a few possible way to pass the variable to the method, depending on the language and its several method invocation modes:

1. 5 gets copied to one of the CPU registers (ie. EAX).
2. 5 gets PUSHd to the stack.
3. 47 gets copied to one of the CPU registers
4. 47 PUSHd to the stack.
5. 223 gets copied to one of the CPU registers.
6. 223 gets PUSHd to the stack.

In every cases above a value - a copy of an existing value - has been created, it is now upto the receiving method to handle it. When you write "Foo" inside the method, it is either read out from EAX, or automatically dereferenced, or double dereferenced, the process depends on how the language works and/or what the type of Foo dictates. This is hidden from the developer until she circumvents the dereferencing process. So a reference is a value when represented, because a reference is a value that has to be processed (at language level).

Now we have passed Foo to the method:

• in case 1. and 2. if you change Foo (Foo = 9) it only affects local scope as you have a copy of the Value. From inside the method we cannot even determine where in memory the original Foo was located.
• in case 3. and 4. if you use default language constructs and change Foo (Foo = 11), it could change Foo globally (depends on the language, ie. Java or like Pascal's procedure findMin(x, y, z: integer;var m: integer);). However if the language allows you to circumvent the dereference process, you can change 47, say to 49. At that point Foo seems to have been changed if you read it, because you have changed the local pointer to it. And if you were to modify this Foo inside the method (Foo = 12) you will probably FUBAR the execution of the program (aka. segfault) because you will write to a different memory than expected, you can even modify an area that is destined to hold executable program and writing to it will modify running code (Foo is now not at 47). BUT Foo's value of 47 did not change globally, only the one inside the method, because 47 was also a copy to the method.
• in case 5. and 6. if you modify 223 inside the method it creates the same mayhem as in 3. or 4. (a pointer, pointing to a now bad value, that is again used as a pointer) but this is still a local problem, as 223 was copied. However if you are able to dereference Ref2Foo (that is 223), reach to and modify the pointed value 47, say, to 49, it will affect Foo globally, because in this case the methods got a copy of 223 but the referenced 47 exists only once, and changing that to 49 will lead every Ref2Foo double-dereferencing to a wrong value.

Nitpicking on insignificant details, even languages that do pass-by-reference will pass values to functions, but those functions know that they have to use it for dereferencing purposes. This pass-the-reference-as-value is just hidden from the programmer because it is practically useless and the terminology is only pass-by-reference.

Strict pass-by-value is also useless, it would mean that a 100 Mbyte array should have to be copied every time we call a method with the array as argument, therefore Java cannot be stricly pass-by-value. Every language would pass a reference to this huge array (as a value) and either employs copy-on-write mechanism if that array can be changed locally inside the method or allows the method (as Java does) to modify the array globally (from the caller's view) and a few languages allows to modify the Value of the reference itself.

So in short and in Java's own terminology, Java is pass-by-value where value can be: either a real value or a value that is a representation of a reference.

Answer 18

As far as I know, Java only knows call by value. This means for primitive datatypes you will work with an copy and for objects you will work with an copy of the reference to the objects. However I think there are some pitfalls; for example, this will not work:

public static void swap(StringBuffer s1, StringBuffer s2) {
    StringBuffer temp = s1;
    s1 = s2;
    s2 = temp;
}


public static void main(String[] args) {
    StringBuffer s1 = new StringBuffer("Hello");
    StringBuffer s2 = new StringBuffer("World");
    swap(s1, s2);
    System.out.println(s1);
    System.out.println(s2);
}

This will populate Hello World and not World Hello because in the swap function you use copys which have no impact on the references in the main. But if your objects are not immutable you can change it for example:

public static void appendWorld(StringBuffer s1) {
    s1.append(" World");
}

public static void main(String[] args) {
    StringBuffer s = new StringBuffer("Hello");
    appendWorld(s);
    System.out.println(s);
}

This will populate Hello World on the command line. If you change StringBuffer into String it will produce just Hello because String is immutable. For example:

public static void appendWorld(String s){
    s = s+" World";
}

public static void main(String[] args) {
    String s = new String("Hello");
    appendWorld(s);
    System.out.println(s);
}

However you could make a wrapper for String like this which would make it able to use it with Strings:

class StringWrapper {
    public String value;

    public StringWrapper(String value) {
        this.value = value;
    }
}

public static void appendWorld(StringWrapper s){
    s.value = s.value +" World";
}

public static void main(String[] args) {
    StringWrapper s = new StringWrapper("Hello");
    appendWorld(s);
    System.out.println(s.value);
}

edit: i believe this is also the reason to use StringBuffer when it comes to "adding" two Strings because you can modifie the original object which u can't with immutable objects like String is.

Answer 19

No, it's not pass by reference.

Java is pass by value according to the Java Language Specification:

When the method or constructor is invoked (§15.12), the values of the actual argument expressions initialize newly created parameter variables, each of the declared type, before execution of the body of the method or constructor. The Identifier that appears in the DeclaratorId may be used as a simple name in the body of the method or constructor to refer to the formal parameter.

Answer 20

Let me try to explain my understanding with the help of four examples. Java is pass-by-value, and not pass-by-reference

/**

Pass By Value

In Java, all parameters are passed by value, i.e. assigning a method argument is not visible to the caller.

*/

Example 1:

public class PassByValueString {
    public static void main(String[] args) {
        new PassByValueString().caller();
    }

    public void caller() {
        String value = "Nikhil";
        boolean valueflag = false;
        String output = method(value, valueflag);
        /*
         * 'output' is insignificant in this example. we are more interested in
         * 'value' and 'valueflag'
         */
        System.out.println("output : " + output);
        System.out.println("value : " + value);
        System.out.println("valueflag : " + valueflag);

    }

    public String method(String value, boolean valueflag) {
        value = "Anand";
        valueflag = true;
        return "output";
    }
}

Result

output : output
value : Nikhil
valueflag : false

Example 2:

/** * * Pass By Value * */

public class PassByValueNewString {
    public static void main(String[] args) {
        new PassByValueNewString().caller();
    }

    public void caller() {
        String value = new String("Nikhil");
        boolean valueflag = false;
        String output = method(value, valueflag);
        /*
         * 'output' is insignificant in this example. we are more interested in
         * 'value' and 'valueflag'
         */
        System.out.println("output : " + output);
        System.out.println("value : " + value);
        System.out.println("valueflag : " + valueflag);

    }

    public String method(String value, boolean valueflag) {
        value = "Anand";
        valueflag = true;
        return "output";
    }
}

Result

output : output
value : Nikhil
valueflag : false

Example 3:

/** This 'Pass By Value has a feeling of 'Pass By Reference'

Some people say primitive types and 'String' are 'pass by value' and objects are 'pass by reference'.

But from this example, we can understand that it is infact pass by value only, keeping in mind that here we are passing the reference as the value. ie: reference is passed by value. That's why are able to change and still it holds true after the local scope. But we cannot change the actual reference outside the original scope. what that means is demonstrated by next example of PassByValueObjectCase2.

*/

public class PassByValueObjectCase1 {

    private class Student {
        int id;
        String name;
        public Student() {
        }
        public Student(int id, String name) {
            super();
            this.id = id;
            this.name = name;
        }
        public int getId() {
            return id;
        }
        public void setId(int id) {
            this.id = id;
        }
        public String getName() {
            return name;
        }
        public void setName(String name) {
            this.name = name;
        }
        @Override
        public String toString() {
            return "Student [id=" + id + ", name=" + name + "]";
        }
    }

    public static void main(String[] args) {
        new PassByValueObjectCase1().caller();
    }

    public void caller() {
        Student student = new Student(10, "Nikhil");
        String output = method(student);
        /*
         * 'output' is insignificant in this example. we are more interested in
         * 'student'
         */
        System.out.println("output : " + output);
        System.out.println("student : " + student);
    }

    public String method(Student student) {
        student.setName("Anand");
        return "output";
    }
}

Result

output : output
student : Student [id=10, name=Anand]

Example 4:

/**

In addition to what was mentioned in Example3 (PassByValueObjectCase1.java), we cannot change the actual reference outside the original scope."

Note: I am not pasting the code for private class Student. The class definition for Student is same as Example3.

*/

public class PassByValueObjectCase2 {

    public static void main(String[] args) {
        new PassByValueObjectCase2().caller();
    }

    public void caller() {
        // student has the actual reference to a Student object created
        // can we change this actual reference outside the local scope? Let's see
        Student student = new Student(10, "Nikhil");
        String output = method(student);
        /*
         * 'output' is insignificant in this example. we are more interested in
         * 'student'
         */
        System.out.println("output : " + output);
        System.out.println("student : " + student); // Will it print Nikhil or Anand?
    }

    public String method(Student student) {
        student = new Student(20, "Anand");
        return "output";
    }

}

Result

output : output
student : Student [id=10, name=Nikhil]

Answer 21

You can never pass by reference in Java, and one of the ways that is obvious is when you want to return more than one value from a method call. Consider the following bit of code in C++:

void getValues(int& arg1, int& arg2) {
    arg1 = 1;
    arg2 = 2;
}
void caller() {
    int x;
    int y;
    getValues(x, y);
    cout << "Result: " << x << " " << y << endl;
}

Sometimes you want to use the same pattern in Java, but you can't; at least not directly. Instead you could do something like this:

void getValues(int[] arg1, int[] arg2) {
    arg1[0] = 1;
    arg2[0] = 2;
}
void caller() {
    int[] x = new int[1];
    int[] y = new int[1];
    getValues(x, y);
    System.out.println("Result: " + x[0] + " " + y[0]);
}

As was explained in previous answers, in Java you're passing a pointer to the array as a value into getValues. That is enough, because the method then modifies the array element, and by convention you're expecting element 0 to contain the return value. Obviously you can do this in other ways, such as structuring your code so this isn't necessary, or constructing a class that can contain the return value or allow it to be set. But the simple pattern available to you in C++ above is not available in Java.

Answer 22

I thought I'd contribute this answer to add more details from the Specifications.

First, What's the difference between passing by reference vs. passing by value?

Passing by reference means the called functions' parameter will be the same as the callers' passed argument (not the value, but the identity - the variable itself).

Pass by value means the called functions' parameter will be a copy of the callers' passed argument.

Or from wikipedia, on the subject of pass-by-reference

In call-by-reference evaluation (also referred to as pass-by-reference), a function receives an implicit reference to a variable used as argument, rather than a copy of its value. This typically means that the function can modify (i.e. assign to) the variable used as argument—something that will be seen by its caller.

And on the subject of pass-by-value

In call-by-value, the argument expression is evaluated, and the resulting value is bound to the corresponding variable in the function [...]. If the function or procedure is able to assign values to its parameters, only its local copy is assigned [...].

Second, we need to know what Java uses in its method invocations. The Java Language Specification states

When the method or constructor is invoked (§15.12), the values of the actual argument expressions initialize newly created parameter variables, each of the declared type, before execution of the body of the method or constructor.

So it assigns (or binds) the value of the argument to the corresponding parameter variable.

What is the value of the argument?

Let's consider reference types, the Java Virtual Machine Specification states

There are three kinds of reference types: class types, array types, and interface types. Their values are references to dynamically created class instances, arrays, or class instances or arrays that implement interfaces, respectively.

The Java Language Specification also states

The reference values (often just references) are pointers to these objects, and a special null reference, which refers to no object.

The value of an argument (of some reference type) is a pointer to an object. Note that a variable, an invocation of a method with a reference type return type, and an instance creation expression (new ...) all resolve to a reference type value.

So

public void method (String param) {}
...
String var = new String("ref");
method(var);
method(var.toString());
method(new String("ref"));

all bind the value of a reference to a String instance to the method's newly created parameter, param. This is exactly what the definition of pass-by-value describes. As such, Java is pass-by-value.

The fact that you can follow the reference to invoke a method or access a field of the referenced object is completely irrelevant to the conversation. The definition of pass-by-reference was

This typically means that the function can modify (i.e. assign to) the variable used as argument—something that will be seen by its caller.

In Java, modifying the variable means reassigning it. In Java, if you reassigned the variable within the method, it would go unnoticed to the caller. Modifying the object referenced by the variable is a different concept entirely.

---

Primitive values are also defined in the Java Virtual Machine Specification, here. The value of the type is the corresponding integral or floating point value, encoded appropriately (8, 16, 32, 64, etc. bits).

Answer 23

In Java only references are passed and are passed by value:

Java arguments are all passed by value (the reference is copied when used by the method) :

In the case of primitive types, Java behaviour is simple: The value is copied in another instance of the primitive type.

In case of Objects, this is the same: Object variables are pointers (buckets) holding only Object’s address that was created using the "new" keyword, and are copied like primitive types.

The behaviour can appear different from primitive types: Because the copied object-variable contains the same address (to the same Object). Object's content/members might still be modified within a method and later access outside, giving the illusion that the (containing) Object itself was passed by reference.

"String" Objects appear to be a good counter-example to the urban legend saying that "Objects are passed by reference":

In effect, using a method, you will never be able, to update the value of a String passed as argument:

A String Object, holds characters by an array declared final that can't be modified. Only the address of the Object might be replaced by another using "new". Using "new" to update the variable, will not let the Object be accessed from outside, since the variable was initially passed by value and copied.

Answer 24

The distinction, or perhaps just the way I remember as I used to be under the same impression as the original poster is this: Java is always pass by value. All objects( in Java, anything except for primitives) in Java are references. These references are passed by value.

Answer 25

As many people mentioned it before, Java is always pass-by-value

Here is another example that will help you understand the difference (the classic swap example):

public class Test {
  public static void main(String[] args) {
    Integer a = new Integer(2);
    Integer b = new Integer(3);
    System.out.println("Before: a = " + a + ", b = " + b);
    swap(a,b);
    System.out.println("After: a = " + a + ", b = " + b);
  }

  public static swap(Integer iA, Integer iB) {
    Integer tmp = iA;
    iA = iB;
    iB = tmp;
  }
}

Prints:

Before: a = 2, b = 3
After: a = 2, b = 3

This happens because iA and iB are new local reference variables that have the same value of the passed references (they point to a and b respectively). So, trying to change the references of iA or iB will only change in the local scope and not outside of this method.

Answer 26

Unlike some other languages, Java does not allow you to choose between pass-by-value and pass-by-reference—all arguments are passed by value. A method call can pass two types of values to a method—copies of primitive values (e.g., values of int and double) and copies of references to objects.

When a method modifies a primitive-type parameter, changes to the parameter have no effect on the original argument value in the calling method.

When it comes to objects, objects themselves cannot be passed to methods. So we pass the reference(address) of the object. We can manipulate the original object using this reference.

How Java creates and stores objects: When we create an object we store the object’s address in a reference variable. Let's analyze the following statement.

Account account1 = new Account();

“Account account1” is the type and name of the reference variable, “=” is the assignment operator, “new” asks for the required amount of space from the system. The constructor to the right of keyword new which creates the object is called implicitly by the keyword new. Address of the created object(result of right value, which is an expression called "class instance creation expression") is assigned to the left value (which is a reference variable with a name and a type specified) using the assign operator.

Although an object’s reference is passed by value, a method can still interact with the referenced object by calling its public methods using the copy of the object’s reference. Since the reference stored in the parameter is a copy of the reference that was passed as an argument, the parameter in the called method and the argument in the calling method refer to the same object in memory.

Passing references to arrays, instead of the array objects themselves, makes sense for performance reasons. Because everything in Java is passed by value, if array objects were passed, a copy of each element would be passed. For large arrays, this would waste time and consume considerable storage for the copies of the elements.

In the image below you can see we have two reference variables(These are called pointers in C/C++, and I think that term makes it easier to understand this feature.) in the main method. Primitive and reference variables are kept in stack memory(left side in images below). array1 and array2 reference variables "point" (as C/C++ programmers call it) or reference to a and b arrays respectively, which are objects (values these reference variables hold are addresses of objects) in heap memory (right side in images below).

If we pass the value of array1 reference variable as an argument to the reverseArray method, a reference variable is created in the method and that reference variable starts pointing to the same array (a).

public class Test
{
    public static void reverseArray(int[] array1)
    {
        // ...
    }

    public static void main(String[] args)
    {
        int[] array1 = { 1, 10, -7 };
        int[] array2 = { 5, -190, 0 };

        reverseArray(array1);
    }
}

So, if we say

array1[0] = 5;

in reverseArray method, it will make a change in array a.

We have another reference variable in reverseArray method (array2) that points to an array c. If we were to say

array1 = array2;

in reverseArray method, then the reference variable array1 in method reverseArray would stop pointing to array a and start pointing to array c (Dotted line in second image).

If we return value of reference variable array2 as the return value of method reverseArray and assign this value to reference variable array1 in main method, array1 in main will start pointing to array c.

So let's write all the things we have done at once now.

public class Test
{
    public static int[] reverseArray(int[] array1)
    {
        int[] array2 = { -7, 0, -1 };

        array1[0] = 5; // array a becomes 5, 10, -7

        array1 = array2; /* array1 of reverseArray starts
          pointing to c instead of a (not shown in image below) */
        return array2;
    }

    public static void main(String[] args)
    {
        int[] array1 = { 1, 10, -7 };
        int[] array2 = { 5, -190, 0 };

        array1 = reverseArray(array1); /* array1 of 
         main starts pointing to c instead of a */
    }
}

And now that reverseArray method is over, its reference variables(array1 and array2) are gone. Which means we now only have the two reference variables in main method array1 and array2 which point to c and b arrays respectively. No reference variable is pointing to object (array) a. So it is eligible for garbage collection.

You could also assign value of array2 in main to array1. array1 would start pointing to b.

Answer 27

I always think of it as "pass by copy". It is a copy of the value be it primitive or reference. If it is a primitive it is a copy of the bits that are the value and if it is an Object it is a copy of the reference.

public class PassByCopy{
    public static void changeName(Dog d){
        d.name = "Fido";
    }
    public static void main(String[] args){
        Dog d = new Dog("Maxx");
        System.out.println("name= "+ d.name);
        changeName(d);
        System.out.println("name= "+ d.name);
    }
}
class Dog{
    public String name;
    public Dog(String s){
        this.name = s;
    }
}

output of java PassByCopy:

name= Maxx
name= Fido

Primitive wrapper classes and Strings are immutable so any example using those types will not work the same as other types/objects.

Answer 28

Java has only pass by value. A very simple example to validate this.

public void test() {
    MyClass obj = null;
    init(obj);
    //After calling init method, obj still points to null
    //this is because obj is passed as value and not as reference.
}
private void init(MyClass objVar) {
    objVar = new MyClass();
}

Answer 29

I have created a thread devoted to these kind of questions for any programming languages here.

Java is also mentioned. Here is the short summary:

• Java passes it parameters by value
• "by value" is the only way in java to pass a parameter to a method
• using methods from the object given as parameter will alter the object as the references point to the original objects. (if that method itself alters some values)

Answer 30

A few corrections to some posts.

C does NOT support pass by reference. It is ALWAYS pass by value. C++ does support pass by reference, but is not the default and is quite dangerous.

It doesn't matter what the value is in Java: primitive or address(roughly) of object, it is ALWAYS passed by value.

If a Java object "behaves" like it is being passed by reference, that is a property of mutability and has absolutely nothing to do with passing mechanisms.

I am not sure why this is so confusing, perhaps because so many Java "programmers" are not formally trained, and thus do not understand what is really going on in memory?